BGSM-G
27
G
G
G
G
G
Contact ID Page
This page will allow you to set up the Contact ID function.
Telephone numbers to call
Four telephone numbers of up to 20 digits (digits and + signs).
This Device will try each telephone number 3 times before considering a call unsuccessful and quitting.
,
,
,
,
,
The Contact ID Codes will be sent to the first number (with Contact ID reporting protocol) that answers the call.
Events description
Customer Code
- type in a 4 character code (accepted values: digits and the letters A, B, C, D, E and F).
To send the SMS it is necessary enter a Customer Code (e.g. 1111) for the relevant event.
Event Code -
type in the
Contact ID to be transmitted when the respective event occurs.
Send -
select (tick) the events to be sent.
Contact ID default
Click on this button to assign the following Event Codes to the events manage by this Device: the
Sur-Gard System III / II Description
column show the label that the Sur-Gard System III and System II receivers assign to the relevant event. The
Qualifier
(E or R) is
automatically generated by the Device and can not be programmed.
Event Description
Qualifier Event Code
Sur-Gard System III / II Description
Input 1 activation
E
11A
FIRE ZONE 001
Input 1 Restoral
R
11A
FIRE ZONE 001
Input 2 activation
E
12A
Panic Alarm ZONE 002
Input 2 Restoral
R
12A
Panic Alarm ZONE 002
Input 3 activation
E
13A
Burglary ZONE 003
Input 3 Restoral
R
13A
Burglary ZONE 003
Input 4 activation
E
15A
24 HOUR (AUXILIARY) ZONE 004
Input 4 Restoral
R
15A
24 HOUR (AUXILIARY) ZONE 004
PSTN Line down
E
351
TELCO 1 FAULT 000
PSTN Line Restoral
R
351
TELCO 1 FAULT 000
12 V Input Loss
E
337
EXP. MOD. DC LOSS 000
12 V Input Restoral
R
337
EXP. MOD. DC LOSS 000
Low Battery Alert
E
338
EXP. MOD. LOW BAT 000
Low Battery Restoral
R
338
EXP. MOD. LOW BAT 000
Periodic Report
E
6A3
Periodic RF Xmission 000
GSM Unit Activation
R
552
Radio Xmitter Disabled 000
GSM Internal Buffer Full
E
624
EVENT LOG OVERFLOW 000
FTC Restoral
R
354
FAILURE TO COMMUNICATE 000
Send Contac-ID over GPRS
If this option is enabled, this Device will only communicate Contact ID events via the GPRS network.
Periodic Reports
This Device can be programmed to send Periodic Contact ID reports. This section will allow you to select the
Date
and
Time
of the first
periodic report and the
Interval
between reports.
Summary of Contents for BGSM-G
