Bentel Security BGSM-G, Manual

28

GSM/GPRS Alarm Communnicator

GPRS page

This page outlines the GPRS configuration options.

Access Point Name (APN)

Enter the Access Point Name of the GPRS service provider being used. (example: ibox.tim.it) Please contact the GPRS service provider
for this information.

Receiver IP address and Port

Enter the primary (mandatory) and back-up (optional) receiver IP addresses and port numbers. Use the same IP address and Port that
is found in the 'Receiver Remote Port' section of the WinBCS, Sur-Gard SYSTEM III and SYSTEM II.

APNs User Name and Password

Some providers may require a user name and password to validate communication. If needed, enter this information here.

DNIS

If required, enter the Dialled Number Identification Service number. This should be the same DNIS number received at the Central Station
when this panel communicates through a land-line.

Account code

An account code is required for communication with WinBCS application, or Sur-Gard SYSTEM III or SYSTEM II receivers. Enter the
Account Code in this field.

Telephone numbers to decode

In this section you may enter up to two telephone numbers dialed by the panel that will be recognized by the Device when called to trigger
GPRS communication. If a number is programmed, any time a number dialed does not match one of the phone number entered, the call
will be routed through the voice channel. Leaving it blank will route all calls to GPRS.

Calls Page

This page will allow you to view on the screen the Dialled, Received and Missed calls.

,

,

,

,

,

Each section can store a maximum of 10 calls. If the number of calls exceeds this limit, this Device will make space
automatically by deleting the oldest calls.

Load button

To view the Dialled, Received and Missed calls, click the 

Load 

button. Depending on programming, some telephone numbers may not

have Caller ID.

Received Calls

If this Device is connected to a Control panel or another telephone device, this section will allow you to view the calls received by this
Device.

Missed Calls

This section will allow you to view any unanswered incoming calls.

Dialled Calls

This section will allow you to view any calls dialled by this Device whether in Contact ID Communicator mode and/or GSM Interface mode.