35
®
G
G
G
G
G
Character
SMS
Character
SMS
a
Outputs Configuration
j
Input 3 Restoral Message
b
SMS Dialler Template
k
Input 4 Activation Message
c
Input Polarity and System varie
l
Input 4 Restoral Message
d
Contact ID Communicator
m
Land line down
e
Input 1 Activationl Message
n
Land line restored
f
Input 1 Restoral Message
o
Power supply trouble
g
Input 2 Activation Message
p
Power supply restored
h
Input 2 Restoral Message
q
Periodic SMS
i
Input 3 Activation Message
r
Edit number in phonebook
<SMS>
- these place cards represent the text message, as described in the “MANUAL PROGRAMMING” section.
To edit a telephone number in the BGSM-I phonebook, send the following message:
p,
”Telephone Number”
,,
”Name”
where:
p
- this place card represents the location in the BGSM-I phonebook where the telephone number is to be saved (2 digits
required, for example 01).
To delete a telephone number from the BGSM-I phonebook, send the following message
p
where:
p
- this place card represents the location of the telephone number in the BGSM-I phonebook (2 digits required, for
example 01).
,
,
,
,
,
The end the Remote Programming phase, send the following message: #AccessCode#**.
INFORMATION FOR THE USER
Remote Programming of the Access Code
To change the Acess Code, use the following SMS text message:
#uuuu#*#nnnn#
where:
uuuu
represents the old Access Code, and
nnnn
represents the new Access Code.
,
,
,
,
,
The default Access Code is
0001
.
GSM Network Calls
If the BGSM-I is connected to a telephone, it will be possible to make calls on the GSM Network.
Further Information
Refer to the following sections for further information:
STATUS LEDs
OPERATING PRINCIPLES
ACTIVATING THE OUTPUTS
“Remote Programming” in the “PROGRAMMING VIA PC section”
