Operation/Maintenance
Installation – Vertical-System
Basic installation
IQ2-Motor with RTS
Control switch with strip terminal
Δ
Important!
Do not apply voltage until all installation work has
been completed.
Please take the information for installation from the leaflet
“Installation – Operation – Care”
, which describes all the
installation procedures in detail.
Cable colours:
BK - (black)
- (GND)
BN - (brown)
- (GND)
GN - (green)
- (close)
WH - (white)
- (close)
YE - (yellow)
- (open)
Set jumper connectins - between terminals 1 + 3
The Vertical Blinds system with motor is controlled by a control
switch and/or remote control.
The louvres are run to the closed and open positions by pressing
the keys 1 and 2. The motor is additionally equipped with an
automatic function that allows it to be moved to the end position.
Briefly pressing the key again interrupts the automatic control
mode.
The motor system is maintenance-free.
Δ
WARNING
Δ
Installation work in the 230 V range must only be carried out
by authorised specialists.
Electrical installation
Installation procedure
1. Connect the control cable to the terminal in the control switch.
2 Connect the control cable to the terminal in the plug.
3. Connect the control cable and the motor.
4. Establish a connection with the main connection cable.
Control switch
2
1
3
1
2
4
5
Track
IQ2-Motor
Control cable
(cut goods)
BK/BN
GN/WH
YE
Current supply
cabel 230 V AC
1.
2.
4.
3.
BK/BN
GN/WH
YE
Δ
Important!
Do not apply voltage until all installation work has
been completed.
Δ
Important!
The motor must not be removed from the track.
Installation procedure
1. Establish a connection with the main connection cable.
2. Teach-in Somfy radio transmitter
(see IQ2-Motor RTS brief instruction)
Telis Mod / Var RTS Pure
Wireless hand transmitter
Current supply
cabel 230 V AC
IQ2-Motor
Track
Δ
Important!
The motor must not be removed from the track.