3
Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data B 40A2,2 ______________________________ 7
2.1 Dimensions B 40 __________________________________ 7
2.2 Working field B 40 A2,2 ___________________________ 8
2.3 Setting of brake plate and air flow ___________________ 9
2.4 Recommended nozzle and pressure _________________ 9
2.5 Burner installation _________________________________ 9
2.6 Nozzle table _____________________________________ 10
2.7 Description B 40 _________________________________ 12
3. General instructions _________________________________ 13
3.1 General rules ____________________________________ 13
4. Installation _________________________________________ 14
4.1 Handling and lifting instruktion _____________________ 14
4.2 Acceptance inspection ____________________________ 15
4.3 Preparations for installation ________________________ 15
4.4 Distribution of oil _________________________________ 15
4.5 Electrical connection ______________________________ 15
4.6 Mount the burner on the boiler _____________________ 16
4.7 Check oil line seals _______________________________ 16
4.8 Air adjustment with damper motor __________________ 17
4.9 Examples of basic setting B 40A2,2 _________________ 18
4.10 Setting values for nozzle assembly and
air damper B 40 _____________________________ 19
5. Burner servicing ____________________________________ 20
5.1 Servicing the combustion assembly ________________ 20
5.2 Servicing air dampers ____________________________ 21
5.3 Replacement of damper motor _____________________ 22
5.4 Servicing the fan _________________________________ 23
5.5 Replacement of oil pump __________________________ 24
5.6 Vibration ________________________________________ 25
6. Instructions Pump __________________________________ 26
6.1 SUNTEC A2L 65C - 75C _________________________ 26
7. Replacement of electrical components ________________ 32
8. Oil burner control ___________________________________ 33
8.1 Wiring diagram _________________________________ 33
8.2 List of components _______________________________ 34
9. Fault Location ______________________________________ 35
9.1 Burner will not start _______________________________ 35
9.2 Burner will not start after normal use ________________ 35
9.3 Delayed ignition __________________________________ 36
9.4 Noise in pump ___________________________________ 36
9.5 Pump pressure __________________________________ 36
10. Log of flue gas analysis ____________________________ 37
11. Oil burners maintenance instructions _______________ 38
