Bentone BENTOFLEX ST 146 B30A, Installation And Maintenance Instruction

4

Bentone  

1.  General Information

This Installation and Maintenance manual:

•  is to be regarded as part of the burner and must always be kept near 

the installation site

•  is intended for use by authorised personnel

•  must be read prior to installation

•   must be observed by all who work with the burner and associated 

system components

•  work with the burner may only be carried out by certified installers/

personnel

•  Enertech AB is not liable for any typographical errors and reserves the 

right to make design changes without prior notice.

•  The burner may only be used for its intended purpose in accordance 

with the product’s technical data.

•  The burner may only be installed and operated by authorised 

personnel.

•  The product is packaged to prevent damage from occurring during 

handling. Handle the product with care. Lifting equipment must be 

used to lift larger packages. 

•  The products must be transported/stored on a level surface in a dry 

environment, max. 80% relative humidity, no condensation. 

Temperature -20 to +60 °C.

•  Check that the burner is compatible with the boiler’s output range.

•  The label information on the rating plate refers to the burner’s minimum 

and maximum power.

•  The power data on the type sign refers to the burner’s min. and max. 

power.

•  All components must be installed without being bent, twisted or 

subjected to mechanical or thermal forces which can affect the 

components.

•  The burner must be installed so that it complies with local regulations 

for fire safety, electrical safety, and fuel distribution.

•  Make sure when installing the equipment that there is enough space to 

service the burner.

•  Permitted ambient temperature during operation -0 to +60 °C. Max 

80% relative humidity, no condensation.

•  The installer must ensure that the room has adequate air supply.

•  The room must comply with local regulations pertaining to its intended 

use.

•  The installation site must be free of chemicals.

•  Burner pipes, fan wheels and air dampers may contain sharp edges.

•  The surface temperature of the burner’s components can exceed 60 

°C.

•  Caution: The burner has moving parts, and there is risk of crushing 

injuries.

165 105 01