33
Bentone
172 615 93-1 2022-03-04
6. Electric equipment
6.1 Safety system
The safety system (safety switch for hatches, doors, water level, pressure,
temperature and other safety devices) must be installed in the safety
circuit in accordance with current regulations for the system. If these
safety requirements are met by other means, safety circuits must be
bypassed/jumpered. This can differ between different systems in which
the burner is installed, see rules and regulations that apply.
The cables of the safety system must be separated so that the outgoing
signal is not placed in the same cable as the incoming signal.
Manual reset with remote reset (optional)
The remote reset shall be installed with a cable connected from X1: 14
which goes to the remote reset switch and back to X1: 5.
Summary of Contents for STG 146i/2
Page 34: ...34 Bentone 6 2 Wiring diagram...
Page 123: ......
Page 124: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone com...
