4
Bentone
1. General Information
172 515 01-2 2021-10-05
The burner may only be used for its intended purpose in accordance
with the product’s technical data.
We reserve the right to make design changes and cannot be held
liable for any misprints or typographical errors.
Modifying the design or using accessories or components that have
not been approved by Enertech in writing is strictly prohibited.
This Installation and Maintenance manual:
•
is to be regarded as part of the burner and must always be
kept near the installation site.
•
must be read prior to installation.
•
is intended for use by authorised personnel.
1.1 Delivery inspection
•
Make sure everything is delivered and the goods have not
been damaged during transit. Transport damage should be
reported to the shipping company.
•
If something is wrong with a delivery, report it to the supplier.
1.2 Safety
- before installation:
•
Installation and work on the burner and associated system
components may only be carried out by persons who have
undergone relevant training.
•
The product is packaged to prevent damage from occurring
when handled – Handle the product with care! Lifting
equipment must be used to lift larger packages.
•
The products must be transported/stored on a level surface
in a dry environment, max. 80% relative humidity, no
condensation.
Temperature -20 to +60 °C.
- installation:
•
The burner must be installed in accordance with local
regulations for fi re safety, electrical safety, and fuel
distribution.
•
The premises must comply with local regulations pertaining to
use of the burner, and must have adequate air supply.
•
The installation site must be free of chemicals.
•
Fire extinguisher with Class BE recommended.
•
Make sure when installing the burner that there is enough
space to service the burner.
•
The electrical installation must be professionally carried out
in accordance with current high voltage regulations and in a
professional manner.
•
Make sure that the burner is suitable for the application (see
Technical Data).
Summary of Contents for STG 146i/2
Page 34: ...34 Bentone 6 2 Wiring diagram...
Page 123: ......
Page 124: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone com...
