20
Owner’s Manual
Pre-Ride Inspection
A pre-ride inspection only takes a few minute, and should
be conducted every time before you ride your
duo
.
1. Check tyre condition and pressure.
2. Ensure the battery is correctly fitted.
3. Check brakes for correct operation; make sure there
is no fluid leakage.
4. Test lights and indicators for correct operation.
5. Check throttle for correct and smooth operation.
6. Adjust mirrors.
7. Check battery charge level.
Contact an authorised Benzina Zero dealer if you identify
an issue.
⚠
Warning!
If the pre-ride inspection is not conducted before using
the
duo
, damage to equipment or severe injury could result.
Pre-Ride
Starting Procedure
1. Deactivate alarm system (see page 10).
2. Insert the key and turn clockwise to the ‘power on’
position (see page 11).
3. Mount the
duo
, and move side stand to up position.
4. Ensure the centre stand is up and all warning lights
are off.
5. Disengage idle safety mode by applying brake lever.
6. Your
duo
is ready to ride when the ‘ready indicator’ is
illuminated (see item 5, on page 9).
⚠
Warning!
The scooter will enter idle safety mode when stationary
for more than 10 seconds without holding the brake lever.
Summary of Contents for duo
Page 1: ...Owner s Manual ...
Page 29: ...Owner s Manual 29 Notes ...
Page 31: ...Owner s Manual 31 ...
Page 32: ...www benzinazero com info benzinazero com Benzina Zero 2022 ...