BENZING M1 – Fancier
OPERATION
HB_BENZING-M1_ZUECHTER-E_13.doc
25
GANTNER Pigeon Systems GmbH
4.1.4 Evaluation at the Club
Evaluation at the club takes place in three steps:
1. The race is stopped:
•
comparison of the clocks
•
pigeons arriving later are marked as ‘non-evaluated’ pigeons
2. The race data is printed out on the printer
3. The race data is read by the PC and is then converted by the software (such as
WINSPEED) in such a way that the prize lists can be generated by a computer.
At any time it is possible to print a stopped (not cleared) race later or read the race data on
the PC.
4.1.5 Clear a Race (Release Pigeons for a New Race)
The pigeons that are basketed for a race can only be basketed for another race after the
first race is finished. It is possible to clear (finish) a race either in the fancier’s mode or in
the club before basketing anew. In the club the evaluation must be finished too (see club
manual).
4.2 Multi-Fancier
Mode
This manual describes the operation of the BENZING M1 as a device for one fancier. Also
available is the BENZING M1 multi-fancier device. It features the option of saving up to four
fanciers. Thus, several fanciers who share one loft are able to carry out races with the same
BENZING M1. The menu guide of the multi-fancier function varies only in a few steps from
that of the device for one fancier.
At the multi-fancier device a differentiation between the individual fanciers is necessary.
Therefore a menu for the fancier selection will be displayed. All the following menus will
indicate the respective active fancier using a number (1-4) on the display at the above left.
Each finished procedure corresponds only to the active fancier and has no influence
whatsoever on the other fanciers.