Remark:
(1) The defaulted temperature of period3 and period4 is the same as
period2. Please change it according to the request.
(2) When setting temperature is 00, this period is power off.
(3) How to check floor temp?
During power on, press and hold then press the button of power to
check floor temp.. OUT TEMP will display.
Press again to display room temp..
Period
Week
Weekend
Period Icon Defaulted Time Defaulted Temp.
1
2
3
4
5
6
1
2
6:00
8:00
11:30
12:30
17:30
22:00
8:00
23:00
20
℃
15
℃
15
℃
15
℃
22
℃
22
℃
15
℃
15
℃
Press to switch operation between manual mode and programmable
mode.
7. Advanced Setting
In the state of power-off, long press and hold then press into
advanced setting mode. Then press to set relative item.
Remark:
Deadzone for floor temp.: i.e. the setting deadzone for floor sensor is 2,
OSV is 42
℃
, when actual temp. reach 44
℃
, the relay will stop working;
when actual temp. is back to 40
℃
, the relay starts working again. It works
when room temp. is lower than set temp.
Sensor error:
Please select the right sensor mode. If select the different mode or there
is error of sensor, Err will display on the LCD screen, the thermostat will
stop heating till the problem is solved.
IX. Phone Port Operation Instruction
1. Install APP on phone
For iOS system: Login in App Store, search “
Beok Home
”, you can
download it on your iphone.
For Android System: Login in Google Play, search “
Beok Home
”, you can
download it on your phone.
Or scan below code to download:
Or scan below code to download:
2. Connection Thermostat with Phone
Thermostat Setting
Hold on Clock key, then press Power key.
Go into Advanced Setting, press Menu key 9 times until FAC mode appears.
When FAC appears, press UP key to change from 8 to 10 or 32.
Then, press power off.
Hold on Clock key, then press Power key again.
At this time, wifi symbol will be twinkling quickly and frequently. It means, you can
connect thermostat with phone now.
When wifi symbol stop twinkling, it means thermostat is successfully connected with
phone.
Twinkling Quickly and Frequently:
Connection can start
Twinkling slowly:
Off Line
Twinkling Stops:
Successful Connection
Connection with Phone
Open Beok Home APP on your phone, you can see APP welcome page
Display Code
Function
Setting And Options
Factory Defult
SEN
Sensor mode
0:Internal sensor
1:Floor sensor
2:Both internal sensor
and floor sensor
0
OSV
Set temp. range
for floor sensor
5-99
℃
42
℃
DIF
Precision for
floor temp.
1-9
℃
2
℃
SVH
High limit temp.
for internal sensor
5-99
℃
35
℃
SVL
Low limit temp.
for internal sensor
5-99
℃
5
℃
ADJ
Measure temp.
Check and calibrate the
actual room temp.
0.5
℃
accuracy
calibrate
FRE
Anti-frozen
00
：
Close anti-frozen
01
：
Open anti-frozen
00
PON
Power memory
00
：
Power memory off
01
：
Power memory on
00
FAC
Factory setting
10 or 32:Wifi mode open
08
：
Just display
08
DFI
Precision for
room temp.
0.5~3
℃
1
℃
