7 INSTRUCTION MANUAL
DESCRIPTION OF THE DEVICE
1. Housing
2. Button to switch speeds
3. Blender attachment
BEFORE FIRST USE
1.
Remove the appliance from the box and remove the packaging material (if
available).
2.
Wipe the device body with a damp cloth and rinse the nozzles with warm
water.
3.
Place the blender attachment on the body and turn it clockwise as shown
in figure 1.
4.
Make sure that the nozzle is fixed and correctly fixed on the device.
5.
After making Sure that the power supply parameters correspond to the
data indicated on the device, connect the power cord plug to it.
6.
The device is ready for operation.
OPERATION OF AN ELECTRICAL APPLIANCE
The submersible blender is suitable for preparing gravies, sauces, soups, mayonnaise and baby
food, as well as for mixing drinks and milkshakes.
ATTENTION!
It is forbidden to use the device for making dense dough (rolls, bread, etc.). If you
use the device for mixing thicker products, it may fail due to motor overload.
Immerse the device in the prepared products or liquids and select the processing speed that is
convenient for you. To mix and grind food, slowly move the appliance up and down in a circular
motion.
Different processing speeds are recommended for grinding products or mixing liquids.
Low speed is recommended for mixing liquid products, and high speed is recommended for
joint processing of liquid and solid products, or for grinding only solid products.
Please note that the temperature of the processed mixture should not exceed 80°C, and it is
recommended to cut large pieces of food into small pieces (about 2 cm).
Fig. 1
