13
Steam cooker Use instructions
EN
4. Cover with the steamer lid.
5. Plug into the outlet.
NOTE
: Don’t operate it without steamer columns and lid in place.
6. Plug the power outlet, a long buzzers will be heard, the display will display “0:00” after 1s, only
the “Mode” button can be activated.
7. Press the “Mode” button, the display will display continuously: a. steamed bread b. steam rice c.
steam fish d. steam chicken or meat e. steam vegetable. Select your desired program, the LCD will
display the default steaming time, and the steaming time can be changed by pressing the “+” and “
” button.
8. The unit has automatic start function, the max delay time is 12 hours and 59 minutes. If you do
not want to the steamer start operation immediately, you may set the automatic start function by
pressing the “Min” as follows:
For example: Set the unit begins working after 2 hours and 30minutes.
1). Operate according to the above 1-8 steps, press “Min” button once, a icon of alarm clock will
display in the left of display, and the “00” begin to flash.
2). Adjust the “00” to the “30” by pressing the “+” and “
” button, then press the “Min” button again and “0” begin to flashing, adjust the “0” to “2” by pressing
“+” and “
” button, confirm the setting by pressing “Min”.
3). Press the “On/Off” button, a long buzzers will be heard, the indicator will flash while the LCD will
count down.
When the time is “0:00”, the icon of alarm clock will disappear, the indicator will stop flashing and
then the unit will begin working.
4). When the operation is finished, the buzzer will beep.
NOTE
: The minimum operation time of every mode is them default time, the maximum is 90 mi-
nutes. During operation, you can cancel the setting by pressing the “On/Off” button for 2 seconds.
Cancellation of the automatic start program: Press the “On/Off” for 2 seconds and a long buzzer will
be heard, the icon of alarm clock will disappear, the time return to zero and cancel all the setting.
9. During work, don’t touch the base, rice pan and steamer columns, always use groves when
handling the food steamer.
10. After finishing steaming, unplug the appliance from the outlet and let it cool completely before
removing the reservoir.
NOTE
: Be careful when removing the drip tray, while other parts of the unit may cool down, water in
the reservoir and drip tray is still very hot.
11. Discard the water after each using, next cycle pour the tap water again.
12. Store the food steamer after all parts cool down completely and place it at the dry location such
as a table top or counter top or a cupboard shelf. The power cord may be wound under the bottom
of steamer.
CLEANING AND MAINTENANCE
1. Allow the appliance to cool down completely before cleaning.
2. Wash the steamer columns, steamer lid, drip tray, rice pan in hot soapy water, rinse and dry
completely.
3. Don’t clean any part with abrasive cleaners such as metal scouring pads, and scouring powder.
4. Don’t immerse the reservoir in water, whereas pour the warm water into the reservoir firstly, then
rinse thoroughly and discard water, finally dry it with soft cloth. All parts except the reservoir can be
cleaned in dishwasher, however, continual cleaning in a dishwasher may result in a slight loss of
polish.
