78
Installation
6002782_b – 14.09.2016
3.5.6
Set the end positions
The remote control is used to set the end positions.
D
“4.2 Remote control” (page 80).
D
ATTENTION!
Danger of damage due to falling parts.
The cover can fall down when it is being removed and
damage the hob, the kitchen furnishings or other objects.
☞
When removing the cover, hold it tightly in both hands.
☞
Protect the area below the device (e.g. using thick
cardboard).
☞
Fold the faceplate down.
☞
Remove the cover over the teach button.
D
ATTENTION!
Danger of irreparable property damage through
improper operation.
If the device drives against an obstacle, the support cables
may be pushed from the rollers.
☞
Make sure that the route of travel is clear.
☞
Use the remote control to move the device upwards.
☞
Press the teach button to slow down the movement.
☞
Release the teach button when the desired top end
position is reached.
☞
Use the remote control to move the device downwards.
☞
Press the teach button to slow down the movement.
☞
Release the teach button when the desired bottom end
position is reached.
In order to correct the end positions:
☞
Repeat the setting.
Summary of Contents for BDL 115 SK
Page 92: ...6002782_b 14 09 2016 ...