79
Installation
EN
6002782_b – 14.09.2016
3.5.7
Set light colour
The rotary control next to the teach button can be used
to set the light colour of the hob to suit the kitchen
environment’s lighting colour.
☞
Switch the lighting on.
D
☞
Set the light colour to suit the lighting colour of the
kitchen environment.
3.5.8
Check and carry out commissioning
D
ATTENTION!
Risk of disruptions due to moisture in the device.
If the device is moved from a cold environment into a hot
one, condensation may form inside.
☞
Wait about 2-3 hours before bringing the device into
service.
☞
Check that an all-pole isolating device (min. 3 mm contact
gap) is present.
☞
Ensure that air outlets on the device are not closed or
covered.
☞
Check the correct functioning of the device.
D
Summary of Contents for BDL 115 SK
Page 92: ...6002782_b 14 09 2016 ...