90
Disposal
6002782_b – 14.09.2016
7.2
Dismounting the ceiling mounting plate
☞
Remove the nuts and the washers from the slots in the
ceiling mounting plate.
☞
Unscrew the nuts from the lock holes in the ceiling
mounting plate.
☞
Rotate the ceiling mounting plate.
☞
Remove the ceiling mounting plate.
☞
Set the ceiling mounting plate down on a clean, solid
surface or in the packaging.
☞
Remove the nuts and the washers from the lock holes.
The device is dismounted.
In extracted air mode:
☞
Remove the exhaust air duct.
8.
Disposal
8.1
Dispose of packaging
D
ATTENTION!
Risk of environmental damage due to improper disposal
of the packaging.
☞
Do not put the packaging into the normal household
waste.
☞
Take the packaging for environmentally friendly and
proper recycling.
The packaging provides protection from transport damage.
Only the original packaging guarantees sufficient protection
during transportation.
☞
Store the packaging in a location which is inaccessible to
children.
The packaging materials have been selected from an
environmentally friendly perspective and are made from
re-usable materials. The packaging materials can be returned
to the raw materials cycle after use. This saves valuable raw
materials.
y
The outer packaging is made from cardboard.
y
The filling material and the insets are made from
cardboard or styrofoam.
y
The protective film and bags are made from
polythene (PE).
☞
Dispose of the packaging in an environmentally friendly
manner, separated by materials.
Summary of Contents for BDL 115 SK
Page 92: ...6002782_b 14 09 2016 ...