Installing the device
32
CAUTION
Risk of injury due to falling parts.
¾
Make sure that nobody is standing
beneath the device during work.
ATTENTION
Damage due to falling parts.
¾
Protect surfaces and devices
(e.g. cooled cooker top) beneath
your working area from damage,
e.g. with thick cardboard.
To ensure that the filter is installed correctly, the
device's filter seat is equipped with an approx.
two cm-high guide aid.
The filter is inserted correctly when the lower edge
of the filter lies fully on the fan housing.
¾
Position the hybrid filter on the device from above.
¾
Make sure that the filter is positioned correctly.
¾
Slide the outgoing air line into the filter.
¾
Mask the transitions with sealing tape.
¾
Make sure that the outgoing air line is correctly
connected.
Installing the removed parts
Following installation, install the removed parts as
follows:
