23
6003983_a
2.6
BWH 90 GL,
BTH 100 ML,
BIH 90
…
120 BL,
BIH 110 EG,
BIH 100 GL
Switch on the extractor hood if you have not already done so.
Perform the steps listed below in order with the
berbel remote control
. Then your extractor hood is
ready for operation.
These settings must only be carried out during the initial commissioning.
Step
Touch field
Action
1
Press and hold the ON/OFF
button for 10 seconds.
All buttons will blink 5 times.
2
Press the recirculating air button.
The symbol now illuminates with
full brightness.
3
Press the ON/OFF button.
All buttons illuminate for 3
seconds.
4
Press and hold the ON/OFF
button for 10 seconds.
All buttons will blink 5 times.
Carry out step 5 while the
buttons are blinking.
5
Enter this button combination
during the blinking process from
step 4.
6
Press this button if it is not
already illuminated.
7
Press the ON/OFF button.
All buttons illuminate for 3
seconds.
Your extractor hood is now ready for operation.
