122
Operation
6005229_0 – 08.09.2020
3.2.1
Establishing the connection
with the extractor hood
When working on the extractor
hood refer to the corresponding
instructions.
Perform the following steps in parallel on
the remote control and on the extractor
hood.
Remote control
☞
Press and hold both buttons at the
same time (> 3 seconds) to start
the connection process.
Both buttons flash for 2 minutes.
☞
Perform the following steps for the
control panel supplied with your
extractor hood.
Ceiling lift hoods
☞
Press and hold the two additional
buttons at the same time (> 3 seconds).
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 122
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 122
08.09.20 08:56
08.09.20 08:56