126
Operation
6005229_0 – 08.09.2020
3.2.3
Extraction mode /
recirculated air mode
changeover
If the extractor hood is configured
for hybrid mode, it is possible to
switch between extraction mode and
recirculated air mode at any time after
activating the changeover function.
The changeover function is activated in
configuration mode.
D
“3.4 Configuring the extractor hood”
(page 136).
Button
If the changeover function is activated:
☞
Touch button 1x.
The button lights up dimly:
y
The extractor hood operates in
exhausted air mode.
y
The wall box is opened.
y
The cleaned air is discharged
outside.
The button lights up brightly:
y
The extractor hood operates in
recirculated air mode.
y
The wall box is closed.
y
The cleaned air is discharged into
the room.
3.2.4
Filter filling indicator
The device has a control indicator to
remind the operator to change the filter
filling. If no air circulation filter is used,
the control indicator has no meaning.
The function is set so that the button
flashes every 1,000 fan operating hours
(flash duration 120 seconds) as soon
as the extractor hood is turned off. The
hours counter is restarted by switching
off the control indicator.
Button
Button flashes:
The filter filling must be replaced.
Observe the extractor hood
instructions.
☞
Hold the button (> 1 second) to
restart the hours counter.
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 126
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 126
08.09.20 08:56
08.09.20 08:56