136
Operation
6005229_0 – 08.09.2020
3.4
Configuring the extractor hood
Button
The extractor hood is turned on.
☞
Touch and hold 1x button for
longer than 5 seconds until the
configuration steps are complete.
All buttons flash.
The extractor hood switches to
configuration mode.
The configuration mode is turned on.
To exit the configuration mode:
☞
Release the button.
The settings are now saved.
The extractor hood is in normal mode
again.
If the extractor hood is equipped
accordingly, the following functions can
be set up in configuration mode.
Button
AutoRun.
As delivered, the function is turned on.
☞
Touch the button one time.
Button glows brightly:
The AutoRun automation is activated.
☞
Touch the button one time.
Button flashes:
The AutoRun automation is
deactivated.
Button
Extraction mode / recirculated air mode
changeover.
As delivered, the function is turned off.
☞
Touch the button one time.
Button glows brightly:
The changeover function is activated.
☞
Touch the button one time.
Button flashes:
The changeover function is
deactivated.
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 136
BER_6005229_GA_BFB6_Buch_A5_DE-FR-IT-NL-EN.indb 136
08.09.20 08:57
08.09.20 08:57