92
Installation
6002644_0 – 20.01.2016
3.5.7
Connect exhaust air ducting (with exhausted
air and hybrid operation)
Extracted air mode
2.
1.
2.
☞
Fit the exhaust air ducting onto the guide on the fan
housing from above.
☞
Seal the transition between the exhaust air ducting and
the guide with the help of sealing tape (accessory).
☞
Ensure that the exhaust air duct is correctly fitted.
Hybrid mode
☞
Fit the exhaust air ducting onto the collar of the hybrid
filter from above.
☞
Ensure that the exhaust air duct is correctly fitted.
3.5.8
Establish electrical power supply
☞
Observe the voltage specifications on the rating plate.
☞
Plug the connecting cable mains plug into the socket.
☞
Route the cable such that it is not kinked, crushed or
damaged and so that it will not get in the way when
replacing the filter filling.
☞
Make sure that the device can be disconnected on all
poles from the electricity supply after installation.
The device is ready for operation.
3.5.9
Set the light colour (for Glassline and Ergoline
headroom hood)
The light colour of the device can be set to suit the lighting
colour of the kitchen environment via the rotary control.
After installing the chimney, the rotary control is no longer
accessible.
☞
Switch the lighting on.
D
“4. Operation” (page 96).
☞
Set the light colour to suit the lighting colour of the
kitchen environment.
Summary of Contents for BKH 110 EG
Page 37: ...37 NL 6002644_0 20 01 2016 ...
Page 73: ...73 DK 6002644_0 20 01 2016 ...
Page 112: ...6002644_0 20 01 2016 ...