95
Installation
EN
6002644_0 – 20.01.2016
3.5.12 Check and carry out commissioning
ATTENTION!
Risk of disruptions due to moisture in the device.
If the device is moved from a cold environment into a hot
one, condensation may form inside.
☞
Wait about 2-3 hours before bringing the device into
service.
☞
Check that the mains plug is freely accessible or that
an all-pole isolating device (min. 3 mm contact gap) is
present.
☞
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞
Ensure that air outlets are not closed or covered.
☞
With recirculating devices: Make sure that the ventilation
slots are free.
☞
Check the correct functioning of the device.
D
“4. Operation” (page 96).
Summary of Contents for BKH 110 EG
Page 37: ...37 NL 6002644_0 20 01 2016 ...
Page 73: ...73 DK 6002644_0 20 01 2016 ...
Page 112: ...6002644_0 20 01 2016 ...