142
Operation
6003480_0 – 27.03.2017
4.3.4
Check filter filling indicator
The device has a check indicator in order to remind the
operator to change the filter filling. In recirculated air mode,
the check indicator flashes every 350 hours of operation.
The hours counter is started anew by switching off the check
indicator.
The check indicator is switched off in configuration mode.
D
“4.4 Configuration” (page 142).
Touch
field
Function
Touch field flashes:
The filter filling must be replaced.
D
“6.2.2 Replacing filter filling (with
recirculating and hybrid mode)”
(page 145).
4.4
Configuration
Touch
field
Function
The device is switched on, the power stages
are not active.
Touch the touch field 1x - for longer than
10 seconds.
The power level touch field flashes 5x.
The device switches to configuration mode.
The configuration mode is turned on.
To exit the configuration mode:
Touch the touch field 1x.
The settings are now saved.
All operating symbols illuminate for 5 seconds.
The device is in normal mode again.
In the configuration mode, the following functions can be
activated or deactivated by touching the corresponding
touch fields.
Touch
field
Function
Touch the touch field 1x.
The hob lighting switches on.
Press the touch field again to start the
colour cycle.
After the touch field is released, the
colour cycle stops and the selected colour
temperature is saved.
Touch
field
Function
Effect lighting.
As delivered, the function is activated.
Touch the touch field 1x.
Touch field illuminates brightly, touch field for
effect lighting illuminates dimly:
Effect lighting is switched off.
Extraction mode / recirculated air mode
changeover.
As delivered, the function is turned off.
Touch the touch field 1x.
Touch field illuminates brightly,
touch field for recirculated air mode
illuminates dimly:
The changeover function is activated.
Touch the touch field 1x.
Touch field illuminates dimly,
touch field for recirculated air mode is off:
The changeover function is deactivated.
Check filter filling indicator.
The function is set such that touch field
for recirculated air mode flashes every
350 operating hours.
The filter filling has been changed:
Touch the touch field 1x.
Touch field illuminates brightly:
The hour counter starts anew, the touch field
for recirculated air mode is switched off.
Automatic run-on.
As delivered, the function is turned off.
Touch the touch field 1x.
Touch field illuminates brightly:
Automatic run-on is activated.
Summary of Contents for BKH 110 GL-2
Page 152: ...6003480_0 27 03 2017 ...