Berbel Downline BKF 83 DL-A, Operating And Installation Instructions

27

Operation

6004977_a – 28.02.2020

EN

Access takes place after pressing the menu button; 
the corresponding symbol is displayed. 

Button

Function

☞

Press the slider at the position below the 
symbol.

y

The four displays of the cooking zones 
briefly blink the word “C-H-E-F”.

y

The cooking zones are ready for the 
cooking process in the saved power levels.

To switch off the function:

☞

Press the menu button. 

☞

Press the slider at the position below the 
symbol.

4.3.9 

Automatic pot recognition function

Function for automatic recognition of cookware placed on a 
cooking zone. With recognition, it is possible to operate the 
selected cooking zone directly via the slider. 

As delivered, the function is activated.

Access takes place after pressing the menu button; 
the corresponding symbol is displayed. 

Button

Function

☞

Press the slider at the position below the 
symbol.

y

The symbol illuminates dimly.

y

Automatic pot recognition is switched off.

To switch the function on again:

☞

Press the slider again at the position below 
the symbol.

y

The symbol illuminates brightly.

4.3.10  Volume function

Function for adjusting the volume of acoustic signals. 
Access takes place after pressing the menu button; 
the corresponding symbol is displayed.

Button

Function

☞

Press the slider at the position below the 
symbol.

Adjustment of the volume on the slider:

y

Direct selection by tapping the power 
level.

y

Swiping movement to the right in order to 
increase the volume.

y

Swiping movement to the left in order to 
decrease the volume.

To exit the function and save the adjusted 
value:

☞

Press the menu button.

4.3.11  Light function (optional)

Function for controlling a connected light source. When 
the device is switched on and off, the connected lighting is 
also switched on and off. When the run-on function is used, 
the lighting remains switched on.

As delivered, the function is deactivated. The brightness is 
adjustable in stages.

Button

Function

☞

Press the slider at the position below the 
symbol.

y

The symbol illuminates brightly.

y

The light function is activated if a value 
greater than 0 is set with the slider.

Adjusting the brightness on the slider:

y

Direct selection by tapping the power 
level.

y

Swiping movement to the right in order to 
increase the brightness.

y

Swiping movement to the left in order to 
decrease the brightness.

To exit the function and save the adjusted 
value:

☞

Press the menu button.