13
Installation
6005437_a – 30.05.2022
EN
☞
Feed the mains cable with the Wieland plug tightly from
the device to the ceiling mounting plate.
☞
Secure the mains cable to the ceiling mounting plate with
a cable tie.
☞
Connect the earthing cable.
D
WARNING!
Risk of injury due to the device falling down!
Loosen the mounting sleeves to align the device. If the
fastening sleeves are loosened too far, the support cable
can be torn out of the screwed end and the device may fall
down. The device’s size and weight can cause severe injuries.
☞
Never unscrew the fastening sleeves completely.
☞
Ensure that there is no more than 10 mm of thread on the
screwed end visible.
☞
Align the hood body horizontally by adjusting the
fastening sleeves.
☞
Tighten all fastening sleeves using the lock nuts (counter
nuts) on the ceiling mounting plate.
☞
Ensure that all fastening sleeves are fully tightened on the
ceiling mounting plate.
The hood body is aligned and secured.
☞
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞
Push the cover (placed loosely on the hood body) over
the support cable and the ceiling mounting plate.
☞
Screw in the lock nuts.
☞
Tighten the lock nuts to hand-tight.
Summary of Contents for Skyline Round BIH 60 SKR
Page 26: ...26 6005437_a 30 05 2022 ...
Page 27: ...27 6005437_a 30 05 2022 ...
Page 28: ...6005437_a 30 05 2022 ...