15
Installation
6005437_a – 30.05.2022
EN
☞
Use the remote control to move the device downwards.
☞
Press and hold down the teach button to slow down the
movement.
☞
Release the teach button when the desired bottom end
position is reached.
In order to correct the end positions:
☞
Repeat the setting.
☞
Place the cover on the device.
3.4.6
Set colour temperature
The colour temperature of the hob lighting, the effect
lighting and the ceiling effect lighting can be set to the
colour temperature of the kitchen environment. This may be
set individually or synchronously.
The remote control is used to set the colour temperature.
Observe the instruction manual for the remote control.
3.4.7
Check and carry out commissioning
D
ATTENTION!
Risk of disruptions due to moisture in the device!
If the device is moved from a cold environment into a hot one,
condensation may form inside.
☞
Wait about 2-3 hours before bringing the device into
service.
☞
Check that an all-pole isolating device (min. 3 mm contact
gap) is present.
☞
Ensure that air outlets on the device are not closed or
covered.
☞
Ensure that the device is freely accessible at all times
(e.g. for maintenance work).
☞
Make sure that the protective film is removed.
☞
Check the correct functioning of the device.
D
Summary of Contents for Skyline Round BIH 60 SKR
Page 26: ...26 6005437_a 30 05 2022 ...
Page 27: ...27 6005437_a 30 05 2022 ...
Page 28: ...6005437_a 30 05 2022 ...