16
Installation
6005736_0 – 25.03.2021
3.5.7
Connecting the power supply
D
WARNING!
Risk of death due to electric shock!
Touching live parts can cause an
electric shock, burns or death.
☞
Ensure that the power supply is switched off and remains
so.
☞
Observe the voltage specifications on the ratings plate.
☞
Connect the power supply cable to the Wieland plug.
☞
Plug the connection cable with the Wieland plug into the
mains cable Wieland socket.
☞
Make sure that the cold device plug from the mains cable
on the fan housing is plugged in.
☞
Make sure that the device can be disconnected on all
poles from the electricity supply after installation.
3.5.8
Fitting the BackFlow port
The BackFlow port is installed with the following operating
modes:
y
Recirculated air mode
y
Extracted air mode with BackFlow technology
y
Hybrid mode
Use of the BackFlow port has effects on the energy efficiency
of the device.
D
“2.1 Functional principle” (page 5).
2.
1.
☞
Fit the BackFlow port on the fan outlet on the chimney
stack.
☞
Secure the BackFlow port by turning slightly to the right.
Summary of Contents for Smartline BIH 100 ST
Page 34: ...34 6005736_0 25 03 2021 ...
Page 35: ...35 6005736_0 25 03 2021 ...
Page 36: ...6005736_0 25 03 2021 ...