103
Installation
6003417_a – 26.09.2017
EN
3.4.9
Check and carry out commissioning
D
ATTENTION!
Risk of disruptions due to moisture in the device!
If the device is moved from a cold environment into a hot
one, condensation may form inside.
☞
Wait about 2-3 hours before bringing the device into
service.
☞
Check that the mains plug is freely accessible.
☞
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞
Ensure that air outlets are not closed or covered.
☞
Make sure that the ventilation slots are free.
☞
Check the correct functioning of the device.
D
Summary of Contents for Smartline BKH 80 ST
Page 112: ...6003417_a 26 09 2017 ...