9
ASSEMBLY
Attach the snowblower to the subframe.
Make sure the snowblower is pushed in until locked
into place by the springs (item 4).
Lift the snowblower by pulling the lift arm. Turn the
tension arm (item 1) towards the back. Hook the
chain (item 2) (of the helper spring) on the tip (item 3)
of the left support intended for this purpose. Turn the
tension arm towards the front to apply tension on the
spring.
Lower the snowblower.
STEP 5
SNOWBLOWER INSTALLATION:
Refer to Snowblower owner’s manual, parts breakdown
section for parts identification.
Install snowblower and lift assist spring
9
WARNING
9
FOR YOUR SECURITY:
Read the Snowblower’s owner's manual for
safety precautions and rules.
Follow the assembly and operation instructions.
9
WARNING
9
TO PREVENT INJURIES:
Stop the motor.
Apply parking brake.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
9
CAUTION
9
Never use the snowblower without the belt guard.
9
CAUTION
9
The belt tension arm is spring loaded & needs to be
held firmly while displacing to prevent injury
.
Item 1: Snowblower pulley
Item 2: Tractor engine pulley
Item 3: Flat pulley L.H.
Item 4: Flat pulley R.H.
Item 5: Drive mechanism pulley
Item 6: Drive mechanism belt
Item 7: Snowblower belt
Remove belt guard.
Install the belt around the pulleys as shown.
Install the belt on the drive mechanism pulley (item 5)
under the tractor.
Apply tension on the belt by pulling up the belt
tension arm.
Reinstall the belt guard.
NOTE:
See belt replacement instructions in the
maintenance section of the snowblower owner’s
manual.
Install belt and belt guard
