13
ASSEMBLY
Attach the utility blade to the subframe as shown.
Make sure the blade is pushed in until locked into
place by the springs (item 1).
Insert the handgrip on the handle.
Insert the handle (item 1) through the support (item 2)
as shown.
Install the handle on the control rod (item 3) as shown
and secure with a 2.5 mm hair pin (item 4).
VERIFY TIRE PRESSURE:
Check and adjust tractor tire pressure as follows:
Front tires:
14-15 psi
Back tires:
7-8 psi
Tire pressure must be even on both sides of the
tractor.
Install blade
UTILITY BLADE INSTALLATION:
Refer to Utility Blade owner’s manual, parts
breakdown section for parts identification.
Install handle
9
WARNING
9
FOR YOUR SECURITY:
Read the Utility Blade owner's manual for safety
precautions and rules.
Follow the assembly and operation instructions.