17
17
1 GeNeRAL
1.1 General instructions
b
On receiving the product, ensure that it is complete and integral and if it does
not comply with the order made, contact the
B
Agency who sold the
appliance.
b
The appliance is to be installed by a qualified company which, on completing
installation operations, will issue the owner 's declaration of conformity con-
firming installation in a workmanlike manner, i.e. in compliance with all National
and Local regulations in force and the instructions provided by
B
in the
instruction manual supplied with the appliance.
b
It is recommended that the installer instruct the user on appliance operation
and the basic safety regulations.
b
The appliance is only to be used for the purpose for which it was specifically
intended, designed and manufactured by
B
. The manufacturer does not
accept any contractual or extra-contractual
B
liability for damage caused
to people, animals or property, due to incorrect installation, setting, or mainte-
nance, or due to improper use.
b
In the event of a water leak, close the water supply and promptly alert the
B
Technical Assistance or a professionally qualified technician.
b
Appliance maintenance is to be carried out at least once a year.
b
This manual is an integral part of the device and therefore should be carefully
preserved and must ALWAYS accompany the product even in the event of its
sale to another owner or user or transfer to another facility. In case of damage
or loss, request another copy from the
B
Technical Assistance for your
Area.
1.2 Basic safety rules
Remember that the use of products which use fuel, electricity and water requires the
observance of some basic safety rules such as:
a
Use of the appliance by children and unassisted disabled persons is prohibited.
a
It is forbidden to operate devices or electrical appliances such as switches or
domestic appliances , etc. if you smell fuel or burning. Should this occur:
- ventilate the room by opening the doors and windows;
- close the fuel shut-off device;
- immediately call the
B
Technical Assistance or a professionally qualified
technician.
a
Do not touch the appliance when barefoot or with any wet parts of the body .
a
It is forbidden to carry out any technical intervention or clean the appliance be-
fore disconnecting it from the mains power supply by setting the power switch
to "off " .
a
Any modifications to the safety and regulating devices without prior authorisa
-
tion or instructions from the manufacturer are strictly forbidden.
a
Do not pull, disconnect, or twist the electrical cables coming from the appliance
even if it is disconnected from the mains electricity supply.
a
Do not leave containers of flammable substances in the room where the ap
-
pliance is installed .
a
Keep all packaging materials out of the reach of children as this could be a
potential source of danger. The packaging material is to be disposed of in
accordance with applicable laws.
1.3 Description of the appliance
CONNECT LE
is a water separator which can be used in conjunction with any boiler; it
is able to separate the water in the heat generator circuit from the rest of the heating
system by dividing it into two (
CONNeCT BASe MIx 1 Le
) or three zones (
CONNECT
BASe MIx 2 Le
) which are at different temperatures. It includes a mixing bottle, an
electronic board, two/three circulation units and one/two 3-way mixing valves which
control the water temperature in the low temperature zones.
It can be housed inside a box (accessory) which can be built into the wall or it can be
wall-mounted.
CONNECT LE
is able to manage the delivery temperatures of the individual zones
separately. Its use is indispensable if the system is divided into a high temperature
zone (radiators) and one / two low temperature zones (radiant panels / fanconvectors)
whose flow rate of water is greater than that delivered by the circulation unit of the
boiler.
The request for heat from the individual zones is via ambient thermostats (TA) or
chrono-thermostats (CT).