Beretta 20184340, Installation Manual

This manual, Code 20184714 - Rev. 0 (11/20) comprises 16 pages.

2

GENERAL INFORMATION

RANGE

MODEL

CODE

SCF-25/4B

20184340

SCF-25/4B (pack of 2)

20184341

SCF-25/4B (pack of 5)

20184342

ACCESSORIES

For a complete list of accessories and details of their com-

patibility, refer to the Catalogue.

Dear heating engineer,

We would like to congratulate you on having recommend-

ed a 

B

 Solar collector unit: a modern product that's 

capable of ensuring a high degree of reliability, efficiency, 

quality and safety.

This booklet provides the information necessary for a cor-

rect and simple installation of the system, whatever your 

expertise and technical competence.

Thank you again, and keep up the good work,

Beretta

CONTENTS

The following symbols are used in this manual:

b 

CAUTION! =

 Identifies actions that require caution 

and adequate preparation.

a 

STOP! =

 Identifies actions that you MUST NOT do.

CONFORMITY

Solar collectors comply with EN 12975-1, ISO 9806 and So-

lar Keymark certification.

1  GENERAL SAFETY INFORMATION

b 

Check that the product is complete, undamaged and 

as ordered as soon as you receive it. Report any dis-

crepancies or damage to the 

B

 dealer who sold 

it.

b 

This product must be installed by a legally qualified 

heating engineer. On completion of the installation, 

the installer must issue the owner with a declaration 

of conformity confirming that the installation has been 

completed to the highest standards in compliance 

with the instructions provided by 

B

 in this instruc-

tion manual, and that it conforms to all applicable 

laws and standards.

b 

This product must only be used for the purpose 

for which it is designed and made, as specified by 

B

. 

B

 declines all responsibility, contractual or 

other, for damage to property or injury to persons or 

animals caused by improper installation, adjustment, 

maintenance or use.

b 

All servicing and repairs must be performed by a 

qualified heating engineer.

b 

Solar collectors must be installed with the correct 

mounting kit (which includes all necessary rails and 

brackets) as listed in the Catalogue.

b 

A protective film is applied to the glass of the solar 

collector to protect the absorber against solar irradi-

ation and prevent the solar collector from becoming 

too hot if it is not going to be put into service immedi-

ately. Fill the system, but do not remove the film until 

you are ready to put the system into service. Take 

care  when  removing  the  film  as  it  may  be  electro-

statically  charged.  Do  not  leave  the  protective  film 

in place for longer than 12 months. Once removed, 

the protective film cannot be re-used.  Dispose of the 

protective film in compliance with legislation govern-

ing the disposal of PVC.

This manual, Code

- Rev.

comprises

pages.

ENGLISH

General information

GENERAL INFORMATION                                            2

1 

General Safety Information  . . . . . . . . . . . . . . . . . 2

2 Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 

Description of the appliance  . . . . . . . . . . . . . . . . 4

4 

Identification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5 

System layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

6 

Technical specifications  . . . . . . . . . . . . . . . . . . . 5

INSTALLATION                                                              7

7 

Unpacking the product  . . . . . . . . . . . . . . . . . . . . 7

8 Handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

9 

Installation area  . . . . . . . . . . . . . . . . . . . . . . . . . . 8

10 

Installation on flat roofs with ballast . . . . . . . . . . . 9

11 

Water connections . . . . . . . . . . . . . . . . . . . . . . . 10

12 

Source water system . . . . . . . . . . . . . . . . . . . . . 12

13 

Filling and emptying  . . . . . . . . . . . . . . . . . . . . . 13

14 

Device cleaning and maintenance  . . . . . . . . . . 13

15 

Recycling and disposal . . . . . . . . . . . . . . . . . . . 13

END USER                                                                  14

16 

External maintenance  . . . . . . . . . . . . . . . . . . . . 14