GENERAL INFORMATION
4
3 DESCRIPTION OF THE
APPLIANCE
The solar collector is a device able to intercept solar radi-
ation and convert it into thermal energy used to heat up a
heat transfer fluid, composed of a mix of water and glycol.
Solar collectors can be used in systems for domestic hot
water production or as a supplement to the heating system.
The main technical elements in the design of the solar col-
lector are:
- the intercepting plate (called absorber) that allows a
high energy absorption and limits its emission.
- the rock wool insulation
- the easy and flexible installation
- the integrability of the element with various covering
technologies
- the long lifespan.
4 IDENTIFICATION
Year of production
Data label
To be applied to the back of
the solar collector on installation
Serial number plate
Data plate
20127468
CODICE :
TIPO : CP25TSS
S/N :
FABBRICATO IN ITALIA da Riello S.p.A.
13000000
BAR CODE 128B
Anno di produzione
SERIALE PROGRESSIVO
EN 12975-1, ISO 9806
Certif.
Serial N°
Model
Codice . . . . . . . .
Modello . . . . . . .
Matricola . . . . . .
Codice . . . . . . . . . . . . . . . . . . . . .
Tipo . . . . . . . . . . . . . . . . . . . . . . .
Dimensioni. . . . . . . . . . . . . . . . . .
Superficie lorda . . . . . . . . . . . . . .
Superficie di apertura . . . . . . . . .
Superficie assorbitore . . . . . . . . .
Peso a vuoto . . . . . . . . . . . . . . . .
Massima pressione di esercizio .
Contenuto liquido . . . . . . . . . . . .
Massima concentrazione glicole .
Liquido termovettore . . . . . . . . . .
COLLETTORE SOLARE (neutro)
FABBRICATO IN ITALIA da Riello S.p.A.
Code
Temperatura di stagnazione . . . .
°C
TCOLL_NEUTRO2
EN 12975-1, ISO 9806
Certif.
COLLETTORE SOLARE PIANO
DIMENSIONI: 2004X1148X85 mm
SUPERFICIE LORDA: 2,301m
2
TEMPERATURA DI STAGNAZIONE: 200°C
SUPERFICIE DI APERTURA: 2,152 m
2
CONTENUTO LIQUIDO: 1,7 l
SUPERFICIE ASSORBITORE: 2,140m
2
PESO A VUOTO: 44,0 kg
LIQUIDO TERMOVETTORE:
ACQUA+GLICOLE PROPILENICO
MAX CONCENTRAZIONE GLICOLE: 50%
MAX PRESSIONE ESERCIZIO: 10 bar
b
If these plates or any other means of clearly identify-
ing the product are defaced, removed or lost, proper
installation and servicing may be rendered difficult.
