USE
10
2.2 Start-up
To switch on:
ON
OFF
— position the system's main switch in the "ON" position.
— press
The unit display turns on.
9
Use the remote control within a range of 7 meters, pointing it
towards the receiver and making sure that there are no obstacles
interposed.
9
The working range could be reduced if electronic starters or TV
sets are nearby.
9
Do not leave the remote control exposed to direct sunlight, near
sources of heat and protect it from water and dust.
9
The remote control is equipped with 1.5 V AAA batteries that
must be removed when climate control system is left unused for
over 3 months.
9
The compressor activates 3 minutes after unit activation.
2.3 Use with closed flap
DooR cloSED
1
Display
2
On- Off key
3
Quick function keys
POWER
TIMER
1
2
3
When the door is closed, you can activate the quick functions, such
as choosing the operating mode and setting the desired temperature.
9
Ensure that the door is fully closed. If this is not the case, the
external keys will not work.
cooling mode
The Cooling mode allows starting and use of the air conditioner as
a producer of cold and dehumidified air. To activate this function an
external temperature b10 ° C and 46 ° C is recommended.
Required ambient temperature available range is between 16 °C and
30 °C.
•
Activation
— press
appears on the display of the remote control and the unit.
Set required temperature as follows:
— work on
Value is stored with no need to press other buttons.
•
Switch-off
— select another operating mode
Alternatively:
— press
to deactivate
Heating mode
The Heating mode allows starting and use of the air conditioner as
a hot air producer. To activate this function an external temperature
between -15 °C and 16 °C.
Required ambient temperature available range is between 16 °C and
30 °C.
