USE
13
A
Cooling and Dehumidification mode
B
Heating Mode
c
Smart mode
D
Initial position
A
B
C
D
— work on
— select required position
Each press will select a different position.
If
is selected, the position automatically changes according to
predefined logics from the program.
9
In environments with high humidity, condensation may form on
the deflector during operation in Cooling and Dehumidification
mode. In this situation, if the deflector is kept in vertical position
for a long time, condensation may fall on the objects below.
9
Do not set under the equipment any objects susceptible to get
damaged in contact with water.
9
When climate control system is turned off, the horizontal deflec-
tor will close automatically.
0
Do not manually move the deflector.
Ventilation mode
The Fan mode allows the user to turn on only the fan, so as to recir-
culate and filter ambient air.
•
Activation
— press
FAN MODE
The display shows the
and the temperature value disappears.
9
The equipment will operate at selected ventilation speed.
9
During operation in Ventilation mode, automatic sped cannot be
selected.
•
Switch-off
— press
or
disappears in the display of the remote control
Sleep function
The Sleep function allows user to select a time period throughout
which the equipment will change reference ambient temperature:
A
Sleep function on
B
Sleep function end and unit switch-off
c
Set temperature
h
Hours passed since function activation
+ 1 °C
+ 1 °C
C
A
1h
2h
8h
B
— increasing it in Cooling and Dehumidification mode
A
Sleep function on
B
Sleep function end and unit switch-off
c
Set temperature
h
Hours passed since function activation
- 2 °C
- 2 °C
+ 1 °C
C
A
1h
2h
5h
8h
B
— decreasing it in Heating mode
9
In Smart mode: depending on the operating mode selected by
the programme.
9
In the Sleep function, fan will decrease its set speed by one.
•
Activation
— press
Remote control display shows
.
