USE
15
9
The set time is memorized by the remote control and appears
every time
is pressed.
9
Programming remains active even when remote control is off.
Automatic switch-off
Automatic switch-off programming allows user to set equipment OFF
time.
9
Before activation, set current time.
TIMER
•
Activation
— press in sequence
until the intermittent
appears
Remote control display shows previously set time.
Set required time as follows:
— work on
— Each time the key is pressed, the values changes by 1. By
keeping the key pressed down, the value changes faster.
— confirm with
The
symbol ends intermittently.
•
Switch-off
— press in sequence
until all the indications relative to the
time programming have disappeared
9
The set time is memorized by the remote control and appears
every time
is pressed.
9
Programming remains active even when remote control is off.
9
Hourly programming has higher priority over the Night function. If
Automatic switch-off is active, the unit turns off even though the
Night function is still active.
Selecting the temperature measurement unit
If required, it is possible to change the temperature measurement
unit.
The available units are:
— Celsius °C
— Fahrenheit °F
Select required unit as follows:
— work on
— Each press will select a different unit, toggling between °C and
°F.
Setting the transmission code
If two indoor units are installed close to one another and user wishes
to control them separately, two different transmission channels can
be set.
For communication to succeed, the selected communication chan-
nel on indoor unit and remote control must be the same.
Available transmission channels are:
Factory set channel is A.
Select required channel as follows:
— work on
Each press will select a different channel, toggling between A and B.
9
The unit will not operate if the transmission channel settings in
indoor unit and remote control are not the same.
9
To change transmission channel on indoor unit, contact the
Technical Support Service.
Button locking
Prevent any accidental control by locking remote control buttons.
•
Button locking
— press
+
simultaneously
