Translated user manual (EN-V11)
BENOMIC
8 / 43
-
Keep a safe distance from fixed and/or moving parts within the greenhouse as well as
cables and ropes.
-
It is forbidden to pull (steel) cables or lay screens using the BENOMIC.
-
It is forbidden to use the BENOMIC as a crane or hoist.
-
It is forbidden for people or pets to enter the track area in which the BENOMIC is in
operation. Never operate more than one pipe trolley in the same track!
-
While in operation all safety caps and protective covers on the BENOMIC must be fitted
and fixed down.
-
All optional equipment, fittings and spare parts must be manufactured and/or supplied by
Berg Hortimotive
-
Harvest containers with sliding racks must be installed in the correct position on the work
platform (see 6.6). The container may overhang the sliding rack up to a maximum of
500mm on both the front and rear sides of the BENOMIC.
-
Harvest containers should only be filled with lightweight produce such as peppers and up
to a maximum weight of 250kg. It is forbidden to use containers on the 3-4 scissor model!
Warning!
-
Operating the BENOMIC should only take place provided that there is nobody in the
vicinity (except the operator) or standing within a short distance.
-
The BENOMIC may only be operated by persons of at least 18 years of age who have
received adequate instructions for operating the BENOMIC and have thoroughly read and
understood the contents of this manual and are fully aware of the associated dangers.
-
The BENOMIC may only be operated once it has been correctly installed on the pipe rail
system.
-
All personnel working in the area of the BENOMIC should be made familiar with the
relevant safety rules and precautions that apply to pipe rail trolley system.
- Instructions from the employer.
-
Repairs to the BENOMIC may only be carried out by staff specially trained by Berg
Hortimotive.
-
During maintenance activities on the scissors they should always be supported using the
scissor wedges (see 9.2).
-
Never carry out activities on the BENOMIC while it is being operated by another person.
Always disconnect the BENOMIC at the main switch and disconnect the charging plug
from the trolley before starting maintenance activities.
-
Check the BENOMIC daily for defects and carry out maintenance on a regular basis - see
chapter 9, maintenance.
-
Keep the controls and safety symbols clean at all times.
- operating controls and safety pictograms should always be visible.
-
The BENOMIC must always be disconnected at the main switch after use.
