Translated user manual V6_EN
METO 1500XXXTS
12 / 47
6.
Transport
The
METO
Spray Trolley will be send to you in combination with a
METO
TRANS
Trolley
or as a single product. When delivered in a combination, the
METO
will be positioned in
the
METO
TRANS
to save space during transportation. Either way the
METO
will be put
in the same condition.
6.1
External transport
When transporting the
METO
be sure the Trolley is conditioned as followed:
-
Emergency button is activated (pressed)
-
The
METO
must stand on its flange wheels on a hard, level surface
-
The
METO
must be kept dry and frost-free at all times during transportation!
-
While transporting the
METO
inside the
METO
TRANS
, the
METO
must be
secured properly to the
METO
TRANS
to prevent movement of the
METO
-
Make sure the
METO
(with
METO
TRANS
) cannot slide or roll within the
transportation space. Secure properly with for example transport straps
-
Before use undo all described items above and check the machine as described in
7.1
6.2
Internal transport
It is also possible to transport the
METO
internally (in the greenhouse). It is preferred that
the wagon is moved on the flange rollers and lift wheels, but it can also be moved by
forklift truck for example. Moving with a forklift truck is done as follows:
-
Place the forks underneath the lifting wheels (white) of the
METO.
-
Check before lifting if the forklift forks are positioned in the right place in order to
prevent damage to the
METO
.
-
Secure the METO (before lifting) to the truck to prevent the METO from falling
while transporting with the truck.
-
Never lift higher than necessary and put the
METO
down carefully.
Please note!
- Never lift higher than necessary!
- Ensure that the forklift truck can lift at least 500 kg weight!
- Remove anything lying loosely on the platform before lifting!
- Drive slowly and carefully!
