Mic-Fi User’s Manual
page 8
5.3
Measurement on iPhone / iPad
Line
Allows you to measure the linear distance between two points.
Simply click and drag to the desired length, and click again to finish.
Angle
Allows the measurement of an angle. Start at the pivot point and extend out to start measuring an angle.
Circle
Allows the measurement of the circumference, area, and radius of a circle. Simply click on any three points on
the circle you wish to measure.
e.g.: click the ruler icon and select “line”.
Select on the image the two points whose distance is to be measured and press again on the screen
. The measure will appear.
Click
to save the image (
Please, don’t adjust again the “Focus & Magnification wheel”
). If the new photo object is
not in focus, please only adjust the distance between the microscope and the object until the photo is clear. The
measurement data can be saved inside the taken photo.
To obtain the accurate measurement data for each magnification, please calibrate before any measurement function.
6.
The App on Android Tablet /Phone
6.1
Installation on Android Tablet / SmartPhone
Install the “Mic-Fi” app and run it by click the icon
If the live video is black or slow, please restart the app again.
Capture photo.
Navigation icon—moving a dot left/up/down/right for calibration or
measurement operation.
Photos folder.
Calibration and measurement.
Resolution Setting. (When changing the resolution, please wait until the
illumination LED is off and lights up again – it takes about 5 seconds).
