Copyright © BERGHOF Automationstechnik GmbH
Reproduction and duplication of this document and utilization and communication of its content are
prohibited, unless with our express permission.
All rights reserved. Damages will be payable in case of infringement.
Disclaimer
The content of this publication was checked for compliance with the hardware and software described.
However, discrepancies may arise, therefore no liability is assumed regarding complete compliance.
The information in this document will be checked regularly and all necessary corrections will be included
in subsequent editions. Suggestions for improvements are always welcome.
Subject to technical changes.
Trademark
CAN
trol
®
//
and
Are registered trademarks of BERGHOF Automationstechnik GmbH
Legal Notice
For the proper characterization of our products it is essential that we employ registered trademarks and
manufacturer names in the documentation related to the services and goods we sell. We would ex-
pressly note that all trademarks, brand names and marks as well as manufacturer names used in this
document are the sole property of the individual owner and are used by us strictly for the purposes of
characterizing our product.
General Information on this Manual
Content:
This manual describes the DIALOG CONTROLLER DC1005 and its modifications. The product-related
information contained herein was up to date at the time of publication of this manual.
Completeness:
This manual is complete only in conjunction with the user manual entitled
'Introduction
to CANtrol Automation System’
s and the product-related hardware or software user manuals required for the particular application.
Standards:
The CANtrol automation system, its modules and its application are all oriented towards the interna-
tional standard, IEC 61131, Part 1 to 4 (EN 61131, Part 1 to 3 and Bbl 1).
Supplementary Sheet 1 of EN 61131 (IEC 61131-4) entitled ‘User Guidelines’ is of particular importance
for the user.
Order numbers:
Please see the relevant product overview in the ‘Introduction to CANtrol Automation System’ manual for
a list of available products and their order numbers.
ID No.:
2809820
You can reach us at:
BERGHOF Automationstechnik GmbH
Harretstrasse 1
72800 Eningen / Germany
Phone: +49 7121 / 894-0
Fax:
+49 7121 / 894-100
e-mail: info@berghof-automation.de
www.berghof-automation.de
BERGHOF Automationstechnik GmbH works in accordance with DIN EN ISO 9001:2000
