16
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 1107
Adjusting the Pivoting Head
See Figure 12 below.
Fig 12
1.
Disconnect the plug from the power supply.
2.
Place the hedge trimmer on a flat surface.
3.
Depress both pivot buttons and adjust trimmer angle adjustment head until it snaps securely
into place at one of their available positions indicated.
CAUTION:
Do not place hand between pivoting head and threaded base. Failure to heed this caution could
result in a pinch point injury.
Cutting Tips
WARNING:
Always keep both hands on the hedge trimmer handles. Never hold shrubs or branches with one
hand and operate hedge trimmer with the other. Failure to heed this warning can result in serious
injury or even death
.