When switched on, the display shows, next to the icon for the current operating mode,
-
the current time and day
-
the current room temperature
-
the current exterior temperature
-
the current setpoint temperature
Changing the room temperature
For short-term manual modification of the setpoint temperature.
Figure 4
The basic display is visible.
o
Touch the left or right sensor button (1).
The display shows the current setpoint temperature.
o
Reduce setpoint temperature: press the left sensor button
–
.
- or -
o
Increase setpoint temperature: press the right sensor button
+
.
The setpoint temperature is adjusted in steps of 0.5 °C.
The adjusted value is applied immediately.
The
›
icon in the display shows that the setpoint temperature was adjusted.
The system returns to the basic display automatically after a specified time has elapsed or
when any sensor button (2) is pressed.
i
With appropriate programming, manual changes to the setpoint temperature is cancelled
by changing the operating mode.
Displaying the main menu
From the main menu, it is possible to access additional functions for controlling and displaying
the room temperature, e.g. cleaning function, operating mode switch, setting the setpoint
temperatures (Figure 5).
Figure 5
The basic display is visible. The main menu is enabled.
Seite 4/13
15.02.2013
32586901
97-09635-000
KNX
Touch/Glass sensor 2gang / 3gang with room thermostat
