BERKSHIRE HATHAWAY Prince Castle 524 Series, Operation Manual

Clean Pie Merchandiser 

Weekly 

PR 63 W1

©McDonald’s Corporation · Planned Maintenance Manual · Revised November 2008

Page 1 of 1

Prince Castle Pie Merchandiser Models 524 

Weekly  

PR 63 W1 

Why 

To keep the merchandiser clean and food safe 

Time required 

10 minutes to prepare 

15 minutes to complete 

Time of day 

At close 

For 24-hour restaurants: during late-night shift 

Hazard icons 

 Chemicals    

 Electricity    

 Hot Surfaces 

Tools and supplies 

SolidSense All Purpose  

Super Concentrate  (APSC) 

SolidSense sanitizer 

Bucket, clean,  

sanitizer soaked towels 

Bucket, soiled towels 

KAY

®

NO-SCRATCH™ Pad 

EXCEED Glass & 

Multisurface Cleaner 

Procedure

1 

Turn off and unplug the pie 
merchandiser. 

Remove all 

food products from the 
cabinet. Let the merchandiser 
cool with the door open for at 
least 10 minutes.

 Electricity

Unplug the merchandiser  
before cleaning. 
 

 Hot Surfaces

Do not attempt to clean a hot 
merchandiser. 

2 

Remove the pie caddy from the 
cabinet. 

Bring the pie caddy to 

the back sink. Wash in back 
sink, rinse, and sanitize. Use a 
KAY

®

 NO-SCRATCH™ pad 

on heavy soils if needed.

 Chemicals

Sanitizer solution 
 

 Equipment Alert

Cleansers, detergents, de-
greasers, sanitizers, or 
bleaching agents that contain 
chlorides or phosphates will 
cause permanent damage to 
stainless steel products. The 
damage appears as pits, 
cracks, and surface discolora-
tion. This damage is 
permanent and is 

NOT

 cov-

ered by the warranty. 

3 

Clean the cabinet interior and 
exterior surfaces

 by spraying a 

clean, sanitizer soaked towel 
with EXCEED and wiping. Use 
a KAY

®

 NO-SCRATCH™ pad 

on heavy soils.

 Chemicals 

Sanitizer solution 

 Equipment Alert 

DO NOT SPRAY WITH 
WATER DURING 
CLEANING. 
The heater components should 
not be exposed to direct con-
tact with water or cleaning 
sprays. 
 

4 

Thoroughly air-dry the cabinet 
and pie caddy.

Place the caddy 

back in the cabinet. 

5 

Reconnect the power cord.