11
BeRnaFOn CHROnOS
Wax Buster (WB)
1. Locate the microphone opening on the face plate.
2. With the dome side facing up, grasp the wind screen with a pair of tweezers and snap it into
the hole.
3. To remove, carefully insert the service tool into the wind screen and pop it out.
1. Insert the tool into the old filter and twist.
2. Remove the filter from the instrument.
3. Take a new filter from the box.
4. Place the filter in the instrument with the gray
side up.
5. Use the tool to tighten the filter.
6. To clean, push down and move the filter back
and forth on a clean cloth.
Wind Screen for Chronos itC instruments
VR_ILLU_ITC_WindScreen_Place2_CMYK_HI
VR_ILLU_ITC_WindScreen_Place1_CMYK_HI
VR_ILLU_ITC_WindScreen_Removal_CMYK_HI
• • • •• • • • •• • • • •• • • ••• • • • • • • • • • •••••••••••••••••••••••••••••••
• • • • •••• • • • • • • • • • •
• • • ••••• • • • • • • • • • •
• • • •• • • • •• • • • •• • • ••• • • • • • • • • • •••••••••••••••••••••••••••••••
• • • • •••• • • • • • • • • • •
• • • ••••• • • • • • • • • • •
Dome side
Rear side
Summary of Contents for CHRONOS 5
Page 1: ...Fitting guide CHRONOS 9 7 5 hearing systems www bernafon com...
Page 2: ......
Page 26: ...26 Note...
Page 27: ......
