12
Chronos is programmed with Oasis 14.0 and higher using Bernafon’s programming cables –
New Standard (no. 2).
Please always insert a fresh battery or battery pill adapter (ITCD only) prior to hearing aid programming.
Note:
For the convenience of wireless hearing instrument programming, wireless compatible Chronos
devices are also compatible with the nEARcom fitting system.
Fitting Chronos with Oasis
attach the programming cables as follows:
Chronos Micro, CP, and CPx BTE
1 Open the battery drawer fully and slide the
programming adapter into the slot until it lines
up with the instrument.
2 Close the battery drawer again and plug in the
cable as shown.
Chronos Nano BTE
1 Remove the cover with the small tool as shown.
2 Plug the cable into the connector.
3 To replace the cover, hook the top end under the shell first, then snap it in place.
VR_ILU_NanoBTEprogRemoveCover1_BW_HI VR_ILU_NanoBTEprogConnectCable_BW_HI
VR_ILU_NanoBTEprogRemoveCover2_BW_HI
Bernafon Veras IFU micro BTE
VR_ILU_DaiFMAdapterOnMicroBTE_BW_MOD_HI
VR_ILU_MicroCompactBTEprogramAdapter_BW_HI
Summary of Contents for CHRONOS 5
Page 1: ...Fitting guide CHRONOS 9 7 5 hearing systems www bernafon com...
Page 2: ......
Page 26: ...26 Note...
Page 27: ......