18
Changing the NoWax filter and the WaxStop
1 Take the stick with the new WaxStop on it.
On the opposite end is a removal socket
for the old WaxStop.
2 Insert the removal plug into the opening of the
old WaxStop and pull it out slowly. Keep the
stick straight.
3 To insert the new WaxStop turn the stick
around and place the new part in the sound
outlet and gently remove the stick.
4 Discard the used stick with the old WaxStop.
It cannot be reused.
1 Remove a tool from the turtle, insert its empty
end into the old fi lter and pull it out.
2 Push a new fi lter into the speaker outlet.
3 Discard the used tool. It cannot be reused.
CN_ILLU_NRWaxStopChanging_BW_HI
CN_ILLU_NRWaxStopChanging1_BW_HI
CN_ILLU_NRWaxStopChanging2_BW_HI
NoWax System
The NoWax system is applicable for the following acoustic setups:
·
M-Speaker coupled with a dome or Lite Tip
·
P-Speaker coupled with a Power Mold
Visually inspect the NoWax fi lter in the end of the speaker unit. If it is clogged or there is no sound
coming from the device, replace the NoWax fi lter.
WaxStop System
The WaxStop system is applicable for the following acoustic setups:
·
M-Speaker coupled with a Micro Mold
·
P-Speaker coupled with any ear piece (instant and custom solutions)
The WaxStop should be changed as needed, to ensure effi cient wax protection, and to prolong the life
of the speaker unit.
CN_ILLU_NRNoWaxGuardChanging_BW_HI
1
2
3
1
2
3
134056_NR_Fitting_Guide_generic_US_Private_Label.indd 18
14.03.13 13:37
NaNo RITE HEaRINg SySTEmS
19
Nano RITE hearing systems are programmed with Oasis using new standard (no. 2) programming cables.
Please always insert a fresh battery prior to programming.
For your convenience, wireless Nano RITE hearing instruments are compatible with the nEARcom
wireless programming system (depends on hearing instrument product family).
fitting a Nano RITE with oasis
attaching the Programming Cables
1 Remove the cover with the screwdriver
as shown.
2 Plug the cable into the connector.
3 To replace the cover, hook the top end under
the shell first, then snap it gently into place.
CN_ILLU_NRProgCablesAttaching1_BW_HI
CN_ILLU_NRProgCablesAttaching2_BW_HI
CN_ILLU_NRProgCablesAttaching3_BW_HI
1
2
3
134056_NR_Fitting_Guide_generic_US_Private_Label.indd 19
14.03.13 13:37
