English
37
5.
Open the valve using the opening knob .
An indication of stroke angle appears.
The position can be set with
OK
on the left knob at any
moment.
However, if the stroke you set is too small, the following
error screen appears.
Select
Try again
with
OK
on the left knob and continue to
open the valve.
When the correct position is reached, select
Save
with
OK
on
the left knob.
The following screen appears.
6.
Select
Confirm
with
OK
on the left knob.
Closing and opening positions are set.
Once end positions are set, proceed to an operation in
each direction to check the settings.
Summary of Contents for AT LOGIC v2
Page 1: ...AT LOGIC v2 RANGE Start Up Guide SUG_17011_EN Ind E Art 5100582 ...
Page 2: ......
Page 71: ......
