English |
11
1 609 92A 1CZ • 8.10.15
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier to con-
trol.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the pow-
er tool is maintained.
Safety Warnings for Sander
Use the machine only for dry sanding.
Penetra-
tion of water into the machine increases the risk
of an electric shock.
Pay attention that no persons are put at risk
through sparking. Remove any combustible
materials in the vicinity.
Sparking occurs when
sanding metal materials.
Caution, fire hazard! Avoid overheating the ob-
ject being sanded as well as the sander. Al-
ways empty the dust collector before taking
breaks.
In unfavourable conditions, e. g., when
sparks emit from sanding metals, sanding debris
in the dust bag, micro filter or paper sack (or in
the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remain-
ders of varnish, polyurethane or other chemical
materials and when the sanding debris is hot af-
ter long periods of working.
When working with the machine, always hold
it firmly with both hands and provide for a se-
cure stance.
The power tool is guided more se-
cure with both hands.
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Products sold in GB only:
Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fitted
in its place by an authorised customer service
agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only:
Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all in-
structions.
Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious inju-
ry.
Intended Use
The machine is intended for dry sanding of wood,
plastic, metal, filler as well as coated surfaces.
Machines with electronic control are also suitable
for polishing.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1
Bolt hole
2
Unlocking button
3
Mode selector switch
4
Sealing collar
5
Sanding plate
6
Screw for fastening the sanding plate
7
Hex key
8
Sanding sheet*
9
Handle (insulated gripping surface)
10
Auxiliary handle (insulated gripping surface)*
11
On/Off switch
12
Extraction outlet piece
13
Screw for extraction outlet piece
14
Thumbwheel for orbit frequency preselection
* The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Random Orbital Sander
BROS-150 T
Art. No.
102525
Preselection of orbital
stroke rate
Rated power input
W
600
No-load speed
min
-1
3100–6650
No-load orbital stroke rate
min
-1
6200–13300
Sanding plate speed in
operating mode 1
min
-1
290–620
Orbit diameter
mm
4.5
Sanding plate diameter
mm
150
Weight according to
EPTA-Procedure 01:2014
kg
2.4
Protection class
/
II
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific coun-
tries, these values can vary.
OBJ_BUCH-1794-002.book Page 11 Thursday, October 8, 2015 3:48 PM
