4
•
While the instrument is operating, be careful not to expose your eyes to the
laser beam. Direct exposure to a laser beam for a long time may be hazardous
to your eyes. The laser beam of Multi HV-R is equivalent to a class II.
•
Operate this laser so that the laser beam plane avoids impact on the eyes of
vehicle drivers or pedestrians.
•
Do not try to dismantle the instrument. Have it repaired by your dealer or
supplier. Dismantling yourself may worsen the problem or void your warranty.
•
When attaching the instrument to a tripod, make sure the instrument is
securely fixed. The tripod leg clamps should be securely fastened. If not securely
fastened or tightened, the main unit could fall off or the tripod could fall over.
•
The laser should not be stored or used in extreme temperature or during rapid
temperature change. The laser may not function properly if used out of the
ambient temperature range.
•
Store inside the carry case and place in a dry area not subject to vibration,
dust or high moisture.
•
If the storage temperature and ambient temperature for usage very signifi-
cantly, leave the laser in its case until it can adjust to the ambient temperature.
•
The laser should be transported or carried carefully to avoid impact or vibration.
•
The laser should be stored in the carry case and packed with cushioning
material. Always handle the laser with care.
•
Never put a wet laser in carrying case.
ATTENTION
SPECIFICATIONS
Multi HV-R
Accuracy
± 1mm @ 10m
Self leveling range
± 5°
Operation range (with detector)
Ø 500 m
Laser source
635 nm, Kl. 2, rot
Rotational head speed
0,60,120,300,600 U/min
Power Supply
Accu-pack with charger (charger socket on the display)
Continuous working time
20 h
Operation temperature
-20°C bis +50°C
Weight
3,8 kg
Dimension
202x202x194 mm
Protection class
IP56
Accuracy with Receiver
± 2 mm / ± 1 mm
IR Remote control
Infrarot, 20 m
Rotating Laser Multi HV-R single device - Art.-No.245071
